Have your windshield wipers started leaving behind streaks of grime? Have you noticed they don’t wipe away the rain and snow as well as they used to?
It’s time to replace them. In fact, one of the best tips for changing windshield wipers is to replace them every six months, especially after a bad winter, if you drive a lot, or park outside.
If you’re wondering how to change windshield wipers, you’ve come to the right place. Check out these three simple steps to changing windshield wipers.
Step 1: Buy the Correct Replacement Wipers
Before you replace the old ones, you’ll need to buy new windshield wipers. You must order the right blade length; otherwise, they won’t fit. You can measure both current wiper blades on your own or look in your owner’s manual for the exact specifications.
Online shopping for parts and getting them shipped safely, like through this service, make it easy to order replacement windshield wipers for your car. If your parts get damaged or lost in transit, you can rest assured that quality customer service will be there to help.
Step 2: Remove the Old Windshield Wipers
Once you have the new blades, it’s time to remove the old wipers. First, you should pull up the entire windshield wiper from the car. It should raise without too much effort and stand vertical.
Take a precaution here by laying down a towel or pad on your windshield. This will protect the glass in case the wiper snaps back into place from the standing position.
Depending on the manufacturer, your windshield wiper may have a tab or hook mechanism. If you have a tab or latch, you can press the button or pull the latch, which will release the wiper. For a hook, you can squeeze the blade and pull it up and out to free it.
At this point, you can slide the blade out. If you’re having trouble doing it with your fingers, use a pair of needle-nose pliers.
Step 3: Slide in the New Blades
Now that you’ve removed the blades, you can reverse the process to insert the new ones. Before doing so, remove all the plastic protections on the wiper. You may also want to wipe them down to make sure they’re clean before installing.
Then, you can slide the blade back through the same slot, facing the same direction as the old one. Make sure it clicks into place, pivot the arm, and lower it back to place. If you want to check your work, turn the wipers on from inside the car.
With that, you’re all set! Repeat on the other side to finish the job.
Wonder No Longer About How to Change Windshield Wipers
Believe it or not, changing windshield wipers is that easy. It takes three simple steps, and you’re good to go. With your replacement blades installed, you won’t have to worry about swapping them out for a while.
Now that you know how to change windshield wipers, you may want to look into other parts you can replace your own. There’s a lot you can do to take better care of your car. If you’re looking for inspiration, visit our site to learn more DIY tips and tricks.